Buy Now!
New Control Arm from 1AAuto.com [ Ссылка ]
This video shows you how to install new control arms in your 2003-2007 Honda Accord. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Pry Bar [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 17mm Wrench [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 32mm Socket [ Ссылка ]
• Locking Pliers [ Ссылка ]
• Pliers
• 1/2 Inch Impact Gun [ Ссылка ]
• Swivel
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• 3/16 Allen Wrench [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer [ Ссылка ]
• Jack Stands [ Ссылка ]
• Punch
• Rubber Mallet [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![](https://i.ytimg.com/vi/6TTBtZgCFLY/maxresdefault.jpg)