Nauticat 36
price : 79900 €
For more information :
[ Ссылка ]
plhyachting@gmail.com
Technical infos :
Hull:
GRP, full displacemet, modified full keel
Length: 10.82 m.
Width: 3.29 m.
Draft: 1.37 m.
Gross Tonnage: 8,000 kg.
Sail Configuration:
cutter ketch rigged (main mast with inner forestay, mizzen mast)
150% genoa on roller furling
hank on storm sail with self tacking track
fully battened main sail with lazy jacks
mizzen sail
Exterior
decks replaced in 2013 with Seacork™ (superior to teak)
custom bimini covers the entire aft deck
heavy duty davits (carry the dinghy at sea or the passerelle in port)
CharBroil BBQ mounted on stern rail
Engine
Ford Lehman
88 HP
3620 hours
Borg Warner Velvet Drive transmission
Racor primary diesel filter
Ground Tackle
Main Anchor
10 kg. Delta anchor on bow roller on the bow sprit
rode consists of 50 meters of 8.5 mm galvanized chain with 200 meters of 19 mm nylon rode spliced on to the end of the chain
rode fed through hawser into chain locker with hatch
Alternative Anchor
33 lb. Danforth mounted on the aft rail (does not fit on the bow roller)
incredible holding power in all bottom types so when the wind is expected to pick up, we put on this anchor
Kedge Anchor
8 lb. Danforth with 10 meters of 6 mm chain
used to pull the stern around when current strength and direction causes the hull to point sideways to the waves
Lofrans 12 V DC Electric Anchor Windlass
with 5/8 inch (8.5 mm) steel gypsies
3/4 inch gypsies also stored onboard
deck mounted switch
Anchor Bouy
with 20 meters of 1/4 inch spectra rode
Sails
Main - replaced in 2010 - slab reefing with lazy jacks, detachable sail cover
Roller furling on Genoa with UV protection
Mizzen Sail with slab reefing and detachable sail cover
Storm Sail - cutter rigged to hank of the inner forestay
For more: [ Ссылка ]
