In an earlier unboxing video, I showed off my recent purchases from ZZPerformance. This serves as Part 1 of the handling upgrades I will be making to my 2015 Impala Limited LTZ, which will be ZZP's Chromoly Tubular Rear Trailing Arms.

MOST W-Bodies left the factory with a stamped steel trailing arms, which are not only flimsy but the open channel tends to fill with dirt and/or road salt and can be severely weakened over time. So this mod serves 2 purposes; to stiffen up the handling, and to prevent the trailing arm from severing due to rot.

Now as you'll see my LTZ has the uplevel FE3 suspension, which came from the factory with boxed trailing arms. Although these boxed arms are in and of themselves an upgrade over the stamped arms, the ZZP arms are MUCH MUCH beefier. That being said, I did install a set of the FE3 arms on both of my old Impalas (2004 and 2012) a few years ago, and after cleaning and painting my 15's old set, will be installing them on my 09 Impala.

[ Ссылка ]

These will fit every W-Body ever produced (1st Gen, Gen 1.5, 2nd Gen, and 3rd Gen) from 1988 to 2016. YES they'll even fit your grandma's 1990 Buick Regal!!

BUICK
1988-2004 Regal
1997-2005 Century
2005-2009 LaCrosse/Allure

CHEVROLET
1990-2001 Lumina
1995-2007 Monte Carlo
2000-2013 Impala
2014-2016 Impala Limited

OLDSMOBILE
1988-1997 Cutlass Supreme
1998-2002 Intrigue

Pontiac
1988-2008 Grand Prix

Thanks for watching! Any questions or comments, please post below. If you found this informative or helpful in any way, give a the video a thumbs up! Be sure to check out my other videos, hit the subscribe button, and ring the bell to be notified of new videos! If you're feeling generous, hit the "Thanks" button below to show your gratitude!

Special thanks to Intro Maker for the new channel intro:
[ Ссылка ]

#impala #WBody #zzperformance

свернуть