This is a flight with my Eflite UMX Sbach 342 V1 that has been upgraded with the same AS3X Receiver that is used on the UMX Sbach 342 3D V2, upgraded Spektrum Servos, as well as a 3000Kv Motor. (More info below..)

RC Groups Blog Write-Up with Photos: [ Ссылка ]

This past week, I completed the transformation of my new Eflite UMX Sbach V1 that has all of its internals upgraded, which included the following parts:

UMX Sbach 342 3D AS3X Receiver (SPMAS6410NBL)
Eflite 3000Kv 180BL Motor (EFLUM180BLB)
Small Parts CNC Aluminum UMX Prop Adapter
Spektrum 2.3 Gram Performance Linear Long Throw Servos x 4 (SPMSA2030L)
Carbon Fiber Rod Spar Reinforcements on Vertical & Horizontal Stabilizers
Dubro 1-1/4" Mini Lite Wheels

What took the longest was replacing all of the stock servos for the Ailerons, Elevator, and Rudder with the Spektrum 2.3 Gram Performance Linear Long Throw Servos. The original stock servos were very "noisy", making some sort of radio frequency chatter upon plugging the battery in. The new Performance Long Throw Servos were silent on start-up. I also took my time to tune and balance the Eflite 5 x 2.75 Prop (which surprisingly gives more punch and power for this airframe as supposed to the GWS 5030) until all that can be felt was the clean spin of the 3000Kv motor itself. With that said, this V1 is now a "Sleeper" AS3X version with an upgraded motor and servos.

For this flight, a Hyperion 2S 240 mAh Babbelbatt was used and my Target Flight Time of 5 minutes was achieved with a final voltage of 7.59 volts.

MODIFICATIONS / UPGRADES
Receiver: UMX Sbach 342 3D AS3X Receiver (SPMAS6410NBL)
Motor: Eflite 3000Kv 180 Brushless Outrunner (EFLUM180BLB)
Prop Adapter: Small Parts CNC Aluminum UMX Prop Adapter
Prop: Eflite 5 x 2.75 Prop
Servos: Spektrum 2.3 Gram Performance Linear Long Throw x 4
Landing Gear: Dubro 1-1/4" Mini Lite Wheels
Reinforcements: .040 Carbon Fiber Rod Spars on the Horizontal and Vertical Stabilizers

Transmitter: Spektrum DX6
Battery: Hyperion 2S 240 mAh Babbelbatt
Timer: 5 Minutes
Lipo Final Voltage: 7.59 Volts out of 8.40 Volts

Camera: iPhone 6 at 1080P / 60 FPS
Headmount: [ Ссылка ]

Thanks for watching and if you haven't already please click the Thumbs Up and Subscribe!

свернуть