1) Ensure the regulator is switched to the On position
2) On the first use, there will be air trapped inside the gas hose which needs to be purged. To do this, push the control knob at the pilot/spark position for 60 seconds
3) Once the 60 seconds have passed, press the red ignition button until a pilot light appears and the centre ceramic plate should also light at the same time. Continue to hold control knob down for another 10 seconds.

4) You can now adjust the control knob to the desired setting.

To turn the heater off,
1) Turn the control knob to the pilot position and switch the regulator to the off position.
Please note that for safety purposes the heater can only be turned off completely via the regulator to ensure the gas supply is cut off.

свернуть