This is my first attempt at making a FPV video diversity receiver. It's based on two RC305 from Hobbyking and then an arduino controller with LCD Shield. The Arduino measures the voltage from the RSSI pins on the RX's. I've set it to play an audible alert if the voltage drops below a certain voltage or if the RSSI signal gets too low. On start up it does an initial Battery voltage detection to establish the low voltage threshold.

Need to build a RHCP helical antenna to replace the dipole currently installed before I take this unit out for it's first maiden.

Supports 2 & 3 cell lipo's with dual RCA out.

свернуть