Paksat mm1 ku band satellite | dth 38.2° signal settings | yahsat se 38.2° settings | Luqman Dishtv

#paksatmm1 #satellite #luqmandishtv #yahsat52e #dishantenna #kuband

paksat mm1 DTH Notification video Link
[ Ссылка ]

Paksat-1R Paksat mm1 new updates and new frequency new settings 2024


Paksat mm1 satellite signal setting Kesay ho gi

Paksat MM1 satellite signal settings depend on several factors including your location, satellite dish alignment, and the satellite receiver you are using. Here are some general steps:

Satellite Dish Alignment: Ensure your satellite dish is properly aligned towards the Paksat MM1 satellite (38.0°E orbital position).

LNB Settings: Set the LNB skew and tilt according to your specific geographical location. This ensures the LNB (Low Noise Block) receives signals correctly.

Satellite Receiver Settings:

Access the menu of your satellite receiver.

Navigate to the satellite setup or installation section.

Choose Paksat MM1 (38.0°E) from the satellite list.

Input the frequency, symbol rate, polarization, and other required parameters for the channels you want to receive. These details can typically be found from the service provider or online resources.

Signal Strength and Quality: Use the signal strength and quality meters on your satellite receiver to fine-tune the dish alignment. Optimal signal strength and quality are necessary for clear reception.

Fine-Tuning: Make minor adjustments to the dish position if needed, and recheck the signal strength and quality after each adjustment.

If you are unfamiliar with satellite dish installation, it may be helpful to consult a professional installer to ensure correct setup and alignment for optimal reception of Paksat MM1 signals.

свернуть