BUY HERE... [ Ссылка ]

Prime you canvas or wooden artists board with our sprayable gesso. Easy to apply and dries quickly leaving no mess.

PINTY PLUS ART - GESSO PRIMER

At last a professional sprayable gesso in a can!

One of our bestesllers. Apply Gesso to an absorbent surface and it acts like a filler and sealer, therefore reducing the amount of paint required and allowing you to rework the paint for a short time, as well as providing a smoother surface to work on. You can even wash it within the first few minutes with soap and water.

It's an artists' dream product and it can be applied to a wide range of materials. It allows adhesion to difficult-to-coat, absorbant surfaces.

Once dry, it can be painted immediately.

Applications:

Allows adhesion on different types of absorbent surfaces, with or without relief, like;

canvas (cotton, linen, and polyester)
wood
plywood
plasterboard
cardboard
Papier-mâché
concrete

Technical characteristics:

400ml = 2 m2
Drying: surface 30 minutes Total 24 hours.

How to apply:

1. Please ensure that the surface is clean, dry and free of any contaminants before application. Shake the can vigorously for 1 minute.

2. Spray from a distance of 25-30 cm, applying thin and quick layers, first horizontally and then vertically. It is advisable to spray two thin layers instead of one thick layer in order to obtain uniform coverage and avoid paint runs.

3. Once the operation is completed reverse the can and push the nozzle until only gas comes out in order to avoid blockage of the nozzle.

Do not use on devices connected to the power grid and apply in ventilated areas.



Tips:

For a coloured finish, repaint with Pintyplus AQUA or EVOLUTION.

In order to get a super smooth surface finish, apply several thin coats, let it dry and sand it lightly until you archive the desired texture.

Applied to large surfaces, it will significantly reduce the amount of paint required to coat the surface.

свернуть