Learn in 8 minutes, how to install and test a Fluidwell product with Modbus on an RS485 2-wire serial communication network. We will describe the following actions on the F103 Flow Logger and Totalizer:
• Communication bus specifications
• Wiring the RS485 2-wire Serial Communication
• Connection with Remote Configuration Cable
• Connection setup of the Modbus Master
• Fluidwell device Settings
- Set the Modbus communication speed.
- Set the bus address of your device.
- Set the Modbus communication mode.
- Set the number of data bits.
- Set the parity mode.
• Test the connection.
All Fluidwell products are Modbus slave devices.

Chapters:

00:00 Intro
00:57 Communication bus specifications
01:27 Wiring the RS485 2-wire Serial communication
01:50 Connection with Remote Configuration Cable
02:10 Connection setup of the Modbus Master
02:55 Fluidwell device settings
03:15 Set the Modbus communication speed
03:58 Set the bus address of your device
04:38 Set the Modbus communication mode
05:08 Set the number of data bits
05:40 Set the parity mode
06:19 Test the connection
07:49 Outro

свернуть