The T/C Impact SB "Speed Breech" plug is designed to be removed by hand but after you fire it a few times you will need to use the wrench because of the fouling. The problem is that you run out of room to manipulate the wrench if you have a scope mounted due to the design of the wrench. Another solution would be to redesign the breech plug with 2 additional holes drilled in the rear so you could reclock the wrench properly. I redesigned/fabricated the factory supplied wrench to solve the problem (Don't mind my crude welds). I cut off the handle, repositioned it 90 degrees and MIG welded it back on. Then I welded a handle for better leverage. Works well. I keep it in my hunting pack. Video taken with an iPhone 11.
Ещё видео!