Click for more info and reviews of this TST TPMS Sensor:
[ Ссылка ]
Check out some similar TPMS Sensor options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this internal tire sensor for the TST-TPMS systems. This is for a quantity of one sensor. Now, this internal sensor will let you monitor one tire with your TST tire pressure monitoring system. This is designed to work with the kit numbers TST507RV4C, the TST507RV6C, and the TST507FT4C and the TST507FT6C.
All four of those kits we do sell separately. This internal sensor provides a little more accurate temperature measurements when compared with the valve stem mounted tire sensors. And to install, it's a pretty easy installation on most wheels up to 22-1/2 inches in diameter. Basically what you'll do is install this band on the center position of the wheel hub, which is also known as the well, and you install the sensor this port here 180 degrees from the tire's valve stem. Once you get it on there, torque the span clamp screw to 30 to 45 inch pounds, and then just trim the excess span.
You do not let the trimmed end of the band protrude away from the wheel. This is, as you can see, a stainless steel hose clamp to resist corrosion. Total strap length on this is about four feet. Now, the battery in the sensor, it's a sealed non-replaceable battery. The battery life on this is up to about four years.
Now, the sensor itself, if we measure the dimension on that, the length of it, we put a ruler on it and see it's about 2-3/4 inches long. The width of it is right at about 1-1/4 inches wide, and then the thickness of it is about 5/8 of an inch. Pressure range on the sensor is one PSI to 188 PSI. And the operating temperature range is negative 40 degrees Fahrenheit up to 230 degrees Fahrenheit. But that should do it for the review on this internal tire sensor for the TST-TPMS systems.
.
Ещё видео!