This video explains in detail how to use a hot laminator.
First start by turning on the laminating device, so that it can heat up, while we prepare our document and the laminating pouch.
Open up the pouch and insert the document. Then close the pouch and make sure that there are no air bubbles trapped in between the pouch and the document. Otherwise these bubbles will remain in the document later on and it will not look as nice.
As soon as the la minter is fully heated up, we can start laminating.
Insert the document into the machine. Do not use any force or try to pull the document back out. The laminator will pull the document at the correct speed, so we can achieve the perfect result.
When the document comes out of the device at the other end, also do not try to pull it out prematurely.
When the laminating process is complete, we can use scissors or a cutting board to cut the document to size. Make sure to leave a wide enough rim around the document, so that the pouch does not open up again.
You can use a corner cutter, to remove the sharp corners.
Good luck!

свернуть