Congrats on your new Bullfrog Spas Swim Series! Now that you have it delivered and the electrical connected it's time for you to start it up! This is a start-up guide based off of our recommendations. This information may vary from dealer to dealer.
1. Select a seat with a JetPak, take the headrest off, put a garden hose behind the jetpack, and fill to the water indicator line.
2. Once filled, turn on the spa. The start-up screen will go through an initializing sequence. Once initialized it will be on the home screen in SPA MODE.
3. Your default water care setting is Super Energy Mode. We suggest going into your water care settings and setting it to Standard Beginner Mode.
4 You are on the Simplicity flat filters, you must change the filter once a month for proper filtration. Your filter compartment is behind the JetPak in Adirondack lounder.
5. Water tests are free, we suggest bringing in a water sample for a water test sheet. This will give you the exact amounts of each chemical needed for your tub! (or find your local Pool and Spa dealer for a water analysis)
6. Assembled the Flippin' frog at setting 0 to start. You can tie the floating device to any part of the spa. When the frog flips upside down the chlorine cartridge needs to be replaced. (There are other ways to sanitize your water but we have found this method to be the best)
![](https://s2.save4k.ru/pic/8IDTL3f89Sk/maxresdefault.jpg)