Buy Now!
New Ball Joint Set from 1AAuto.com [ Ссылка ]
Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 2006-10 Dodge Charger.
• Check here for more videos on the 2006-10 Dodge Charger: [ Ссылка ]
This process should be similar on the following vehicles:
2006 Dodge Charger
2007 Dodge Charger
2008 Dodge Charger
2009 Dodge Charger
2010 Dodge Charger
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• 18mm Socket [ Ссылка ]
• 21mm Socket [ Ссылка ]
• Ball Joint Press
• Snap Ring Pliers
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Cloth Rags [ Ссылка ]
• Copper Anti-Seize
• Liquid Thread Locker
• Paper Towels [ Ссылка ]
• 6mm Allen Wrench [ Ссылка ]
• Hammer [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Dodge Charger 2006-2010 6th Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![](https://s2.save4k.ru/pic/8d1LcFUcpNE/maxresdefault.jpg)