Nexus Pathfinder Two Box Metal Detector Signal Response Hammered Copper Bucket 1 Meter Deep
re information:
[ Ссылка ]
This non-motion twin box metal detector system is designed for deep search and discovery of medium to large size gold nuggets and treasure targets.
Set up and operation is simple.
1. Turn the metal detector on from the Volume control and set the audio volume to a comfortable level.
2. Lower both coils of the detector as close as possible to the ground.
3. While the detector is close to the ground, set the Threshold to a low audible level.
4. Set the Meter balance so that the first led is on.
5. You are ready to go.
TECHNICAL SPECIFICATIONS
● Search coil size - 20 inch hexagonal loops for both receiving and transmitting.
● Operating frequency - 5.7 kHz
● Weight of complete unit - 3.9 kg.
● Detector length - 162 cm.
● Collapsible modular construction for easy transport. The detector can be disassembled to 4 basic components - two coils and two parts of the holding frame.
ELECTRONIC CONTROLS
● Power on/off combined with a Volume control.
● Threshold
● Meter Balance
● Meter Brightness
● Battery Test. Checks battery voltage from 12.3V to 16V.
CONNECTIONS
● TX coil connector
● RX coil connector
● Headphone socket
● On board loudspeaker
● Battery charger socket
● Internal lithium - Ion battery pack, permanently installed in the control box.
● Smart Lithium-Ion battery charger is included in the set.
