It happens that the engine of your chainsaw floods.
Flooded chainsaw engines happen.
We would like to show you how get your chainsaw running again , to get back to work as fast as possible.
We intentionally flood our engine by repeatedly starting the chainsaw with full choke..
Remember to engage the chainbrake during the starting procedure!
We continue starting to ensure that the engine is completely flooded.
It is impossible to start a flooded engine without removing and drying the sparkplug, and removing all excess fuel from the cylinder.
To remove the sparkplug , first remove the airfilter cover and air filter to create enough space to access the sparkplug. Unplug (remove) the sparkplug wire and disassemble (remove) the sparkplug using the included (supplied) socket wrench (sparkplug wrench).
You will see moisture on the sparkplug which we will dry off as soon as we have removed the excess fuel from the engine. To remove the fuel ; simply turn the chainsaw upside down and pull out the starter rope ten to twenty times.
Dry off the sparkplug using a lint-free cloth and re-assemble the it.
Re-attach the sparkplug wire and replace the airfilter and airfiltercover.
Ensure that the choke is "off"
Engage the chainbrake and start the engine!
By following these instructions , time wasting delays become a thing of the past.
Tuintools.nl.... The place to be for all your garden (gardening) tools (implements)
![](https://s2.save4k.ru/pic/9-FLVe2r2BQ/maxresdefault.jpg)