The SB configuration uses two Pulley Blocks to leveraging mechanical advantages that enable a winch to pull at 4X rated capacity. In doing this, the pull point opposite the winch (to include the Pulley Block and connector such as a Soft Shackle) may experience approximately 4X greater loading than the winch capacity, making it important to ensure that all components have the appropriate strength ratings. This is why the SB configuration requires some components that are oversized in comparison to those components required for SLP, DLP and RD. Always remember to remove as many line layers off the winch drum as possible in order to maximize winch pulling power, and when using the winch on an assisting vehicle, be sure to set that vehicle’s brake and chock the wheels with rocks if necessary. Also make sure you shift the automatic transmission into neutral to avoid damaging the parking pawl.
![](https://s2.save4k.ru/pic/95vkD_1Fz6U/maxresdefault.jpg)