Testing the Vasto with a Dewalt DWP611 Router. The material being cut is HDPE or High-Density Polyethylene. Using a 1-Flute endmill, 3.175mm diameter. The router was set to Speed #2 Which reads 18,240RPMs. With bad chip-evac, I did 12mm depth of cut at 1500mm/min with a 3mm step-over. No signs of the machine struggling. The most you hear is the RPMs vary a bit, as the dewalt router tries to hold the RPMs and adjusts as needed.
![](https://i.ytimg.com/vi/97fqYYzdRF0/maxresdefault.jpg)