Click for more info and reviews of this Hopkins Custom Fit Vehicle Wiring:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Today we're going to be taking a look at the Hopkins plug-in simple vehicle wiring harness with the 4-pole flat trailer connector. This product fits certain years and models of the Nisan-Rogue and certain years of the Infinity-G35. It's going to provide a 4 way flat trainer connector at the back of the vehicle to power your trailer signal lights. This is compatible with 5 pole, 6 pole, 7 pole adapters. Adapters are sold separately. It does kind of come with a dusker 00:00:23 for the 4 way flat connector, that way you can cut off the connection points when the plug's not being used. The unit's going to feature protected connection terminals to resist corrosion and last a long time.
It does come with a power tail light converter that connects directly to the vehicle battery through the wiring to avoid overloading the vehicle's electrical system. Now it does not require any cutting or slicing when it comes to the installation. It's designed to connect quickly and easily. All you have to do is locate the connection points in the rear cargo area. You're going to have a connector right here and this connector.
These will get plugged in. Again, vehicle specific, so these plugs are going to match up perfectly with the ports on the vehicle, so you get those connected. Again, connection points on the rear cargo area and then you'll need to make a ground connection. It's going to be this wire right here, white wire with the ring terminal 00:01:05 attached to it. You want to get that grounded to a nice clean metal surface with the included grounding screw and then mount your converter box to a safe inaudible 00:01:13 location with the included cable ties. Then you'll need to run the hot lead 00:01:16 to the vehicle battery.
That's going to be the red wire with the bar connector attached to it. This is going to get connected the one end of the bundle of wiring, the other end gets run 00:01:24 at the vehicle battery, connects with the bar connector on the fuse holder. The other half of the fuse holder has a ring terminal attached to it and that gets attached to the positive plus on the vehicle battery. It does come with your 20 amp fuse. It goes right here on the fuse holder and we've got the cap on it to keep it safe and protected. Then you can secure your wires with the cable ties, so if you have any excess or a slack 00:01:44 in the wires, you can get that up and out of the way with the included cable ties. Then once your install is complete, the 4 way connectors are going to be stored beneath the vehicle near the trailer hitch.
We do recommend using a mounting bracket to keep it secure. Mounting brackets are sold separately. You can find them here at etrailer.com. It is recommended that you use a small amount of grease that's included with the kit. You apply that to the electrical connections like the plugs on the vehicle and the 4 pool connector itself. That grease is designed to help prevent corrosion to the connection points. That's going to do it for today's look at the Hopkins plug-in simple vehicle wiring harness with the 4-pole flat trailer connector.
Ещё видео!