This is our most successful automatic washing line. Its compact, effective, economical & converts any dirty plastic waste to clean densified material directly without any human intervention. It is the most advanced plastic film waste grinding, washing, drying and densifying line. Just load the dirty film waste onto the auto load adjusting conveyor and get clean densified material on the other side in a continuous process.
Components of the system-
The machine is made up of three machines connected together in row running in synchronised manner. This leads to a fully automatic continuous processing system. The three components of the setup are-
A wet grinder
A friction washer
And a drying and densifying system
Grinding system-
Heavy rotor roller with rotating blades. The stationary blades are adjustable and easy to remove for re-sharpening.
Roller bearings mounted in external MS housing separated from the grinding chamber for easy maintenance.
Quick blade change access for minimised downtime.
The water inlet lies at the top part of the hopper pushing the material in with itself straight into the cutting blades.
Washing system-
The friction washer directly receives grinded wet plastic film waste from above. It is placed at a slant angle to create an opposite flow against water and improve washing quality.
The washing system is one of a kind high speed rotor thrashing the waste against the mesh to clear out the toughest of dirt stains.
The rotor has multiple thick flaps and is perfectly balanced for steady output and low vibrations.
The water is pressure injected on the top side and the dirty water exits the washer via a drain unit at the bottom. This is also the drainage point of the grinder, making it easier to feed dirty water into the filtration system (not included in the setup)
Clean and grinded plastic waste is ejected from the other end of the washer. This side is raised and the material directly falls into the feeder of the dryer / densification machine.
Drying and densification system-
The wet, grinded and clean plastic waste then enters the drying and densification machine, also known as SD.
The material is first squeezed to remove most of the excess water by a purpose built screw.
The Barrel lets the water out, collecting and discharging it through a pipe.
The material moves further and is semi melted above 100 degrees centigrade resulting in total evaporation and drying of material.
The plastic film material and then consequently densified and cut into small chunks.
Plastic film waste automatic grinding, washing, drying and densifying machine suitable for material types-
Any type of plastic film waste can be processed through this setup.
PP, raffia bags
HD / LD film waste
MLP film waste
BOPP, etc
Any type of plastic film waste can be processed.
Visit to know more -
[ Ссылка ]
Contact us -
+91 9825009064
Dollplast@dollplast.com
www.dollplast.com
![](https://s2.save4k.ru/pic/9G9lvvkR7ig/maxresdefault.jpg)