In this video I will show you how to install an all metal hotend kit on the Creality CR-10 Smart 3D printer. Currently, there are not too many options listed online specifically for this application... however... the Creality CR6-SE printer is very similar in many ways and the MicroSwiss all metal hotend for the CR6-SE can be very easily made to fit the CR-10 Smart.
► [ Ссылка ]
Other than the MicroSwiss all metal kit, the only other parts you will need are:
► (QTY:2) M3x10mm socket head cap screw
► (QTY:2) M3x15mm socket head cap screw
► 3D printed fan adapter that can be found here:
► [ Ссылка ]
Note that this is the fan adapter that I designed. The one listed on the MicroSwiss website does not seem to fit properly. It is too deep and the extruder fan will interfere with the hot end fan shroud cover when you try to install it.
If you want to support my work and my channel, you can purchase the install kit here that includes the parts to mount a Bondtech LGX Lite & MicroSwiss All Metal Hot End for the ultimate direct drive setup for your CR10 Smart:
► [ Ссылка ]
The entire installation is otherwise very typical of a MicroSwiss all metal hotend installation that you would do on any other 3D printer.
NOTE: One thing I just realized that I forgot to mention in this video is that it would be a good idea to run a PID autotune on your machine with the new hotend. On the CR-10 Smart I think this option is available on the touchscreen with the latest firmware... I'm still running the old firmware and so I was able to do this through the gcode terminal in Octoprint. To connect your CR-10 Smart printer to Octoprint, follow this video here:
► [ Ссылка ]
In an upcoming video, I will be converting this machine to a direct drive extruder in combination with this hotend. So please subscribe and keep an eye out for that video in the near future!
Thanks for watching!
#DIY #3DPRINTING #FILAMENT
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► [ Ссылка ] ☕
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► [ Ссылка ] 📷
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
DIY and MAKER:
► The Hacksmith
[ Ссылка ]
► Adam Savage Tested
[ Ссылка ]
► Thomas Sanladerer
[ Ссылка ]
Car Content:
► Mighty Car Mods
[ Ссылка ]
► Drivetribe
[ Ссылка ]
