[ Ссылка ]

Industrial plumbing pipe seven level floor shelf kit is an industrial looking shelf made from plumbing pipe. This large floor shelf is made from vintage style plumbing components are finished in standard galvanised or black steel finish plumbing pipe. Designed to withstand a reasonable weight, this shelf is designed for many uses, from storing boxes and books, to plant feature stacking. This shelf will turn your everyday storage space into a main feature of the room.

This shelf is attached to the wall and floor by means of decorative steel flanges or plain galvanised flanges. The floor connection will take the weight and the wall connection will hold it in place. Shelves are located via holes drilled in correct location and install whilst constructing. We supply a diagram and instructions with this kit of parts.

Each shelf kit will require at least two upright brackets. Most shelf units will be comprised of 3 uprights but here you have a choice of two or three uprights as a calculated product. If you require 4 then order two “two uprights”. If you need 5 then order one “two uprights” and one “three uprights” on the order. You can also specify the length of the bottom pipe to get the bottom shelf away from the floor a little more.

This fitting is built by hand one shelf at a time insitu. Flange screws are provided for timber, plaster or brick. This design can take quite a load but specific capacity is determined by the shelving material and the distance between uprights. For greater load bearing place uprights closer together.

Components included

This a DIY kit this product includes this number of parts per upright.

7 X 250mm threaded shelf upright pipe lengths in Galvanised or Black steel
7 X 150mm threaded shelf pipe lengths in Galvanised or Black steel
2 X 200mm threaded shelf leg and top lengths in Galvanised or Black steel
2 X 200mm threaded pipe legs in Galvanised or Black steel (for 470mm option)
1 X Plumbing pipe Coupler in Galvanised or Black steel
7 X Plumbing pipe Tees in Galvanised or Black steel
2 X Wall flanges in Galvanised or Black steel
8 X Pipe fitting Elbows in Galvanised or Black steel

The Shelf

Timber components are not included in this product. We can supply if required, shelf components to suit the exact length required for your project. Shelving timber is listed below. If you are supplying your own shelving the dimension will need to be your specific length X a width of 235mm-250mm. The hole that needs to be drilled out for the pipe to travel through will need to be 22mm. This can be hardwood, pine, or plywood.

The distance between each level of the shelf is 250mm and the distance from the wall is 250mm.

свернуть