How to actually flash the Sonoff Bridge. USB to Serial tool is here [ Ссылка ] and esptool.exe from [ Ссылка ]
So the actual sequence is:
000 prep is to download latest tasmota.bin and esptool.exe and get flashing command line ready
00 Unbox device
01 move slider switch underneath pad towards the flashing puns
02 connect up 4 wires flash tool
03 use esptool.exe to perform flash of latest tastmota.bin
04 when flashing is finished unplug RF bridge and take out flashing card, not needed anymore
05 move back slide switch to original position
06 power device from USB, will come up with its own wifi bubble sonoff.something
07 connect to that bubble normally on autoconfigure address on winodws pc 192.168.4.1
08 first thing is to put in your home IOT wireless netowrk SSID and password, save, it reboots
09 a few other config steps, main is Config Type == sonoff Bridge 25
10 rest of config siutuation dependant. we're using mqtt and domoticz so blog article refers
![](https://i.ytimg.com/vi/A5N2Pd6lxMo/maxresdefault.jpg)