This is how to do a service reset on a VW Polo 2011..should work on polo from 2008-2017 on a 6C chassis.
IF THIS METHOD DOESNT WORK OR YOU HAVE INSPECTION SERVICE THEN YOU WOULD REQUIRE RESET VIA DIAGNOSTIC!
On the dash is two buttons, button 1 with two rectangles overlapping and button 2 is 0.0/SET.
On the dash, press button 1 until it shows service information. Mine showed -26 and 0miles.
Heres how I did it.
Step 1) Ignition OFF, press and hold button 2.
Step 2) Whilst holding button 2, turn ignition ON.
Step 3) Soon as you see the spanner appear, release button 2 and quickly press button 1.
The spanner should now disappear and should show your mileage.
To confirm the reset has been completed, press button 1 until you see the service information. As you can see, mine now shows 365days and 9100miles confirming reset is complete.
![](https://i.ytimg.com/vi/AHmqYwDUFW4/maxresdefault.jpg)