This video teaches you how to do rj9 installation. Below are the installation steps:
1. Use a wire stripper to strip the RJ-45 wire by 1 to 2 inches of the outer layer of the wire.
2. Separate the twisted RJ-45 wires and we only need to use the blue, blue with white stripped, green, green with white stripped
3. Place the RJ-45 wires into the RJ-9 keystone by blue, blue with white stripped, green, green with white stripped.
4. Use the punch down tool to keep the RJ-45 wires in place onto the RJ-9 keystone.
5. Use a pair of cutter to cut the rest of the RJ-45 wires.(The rest of the wire can be use to tie around the wire for extra toughness).
6. After that place the RJ-9 keystone onto the RJ-9 face plate.
7. Screw in the RJ-9 face plate with a screwdriver.
8. Close the cover of the RJ-9 face plate.
9. Plug in RJ-9/11 cable into the RJ-11 faceplate.
10. Connect the other end of the RJ-11 cable from the face plate into the cable tester.
11. Next is to connect the keystone RJ-11 cable into the cable tester.
12. Test and see if the cable are place in the correct position.(If it is correct the light should match with each other)
Visit and join us at [ Ссылка ]
Tel: +6016 647 4188 / +604 611 7588
Email: info@itpa.my
5-5-37, The Promenade,
Persiaran Mahsuri,
Bandar Bayan Lepas,
11900 Bayan Lepas,
Penang, Malaysia
Ещё видео!