Click for more info and reviews of this CURT Custom Fit Vehicle Wiring:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]

Full transcript: [ Ссылка ]
Today we're going to review part number C56159. This is the Curt T-connector vehicle wiring harness with the four-way flat trailer connector for factory tow package. This part is a custom fit part, it is designed to fit the Landrover Evoque starting in 2012 that has the factory tow package. Now on any custom fit part what I like to recommend is always go to our website, use our Fit Guide, put in your year model vehicle and it'll show you if this will work for your application. This harness will provide this four-way flat trailer connector at the back of your vehicle to power your trailer signal lights. It does connect very quickly and easily, there's no cutting or splicing wires. Basically, you'll just locate your connection point that's behind the rear bumper, plug in this connector that'll match up to the connector on the vehicle, ground this white wire, and you'll be all set to go. Now this part includes everything shown here on the table.

Comes with a nice set of detailed instructions that describe how to install it and even shows pictures of where the connection point is. Comes with this nice dust cap for your four-way. Basically you can just attach this dust cap to your four-way plug and you can leave it on there if you like and when you're not plugged into your trailer all you have to do is put that cap over the terminals. It'll protect it from any damage or from the elements. Comes with the grounding screw which would be used to connect this white wire to a good, clean ground.

It comes with some cable ties to take up any slack in the wiring. So basically, all you have to do is go to the back of your vehicle by the rear bumper, find that connector, plug it right into here, ground this wire, run this out the back, and plug into your trailer and you'll be all ready to go. That should do it for the review on part number C56159. This is the Curt T-connector vehicle wiring harness with the four-way flat trailer connector for the factory tow package.

свернуть