If you have installed LED taillight or brake lights and your signals are hyperblinking (hyperflashing) or you have a "bulb out" warning, chances are you need an LED Load Resistor in the circuit. LED bulbs draw less current than incandescent, so computerized monitor systems can mistake this for a burned out bulb.

The resistor used in the video is a 25W 6ohm model and it is installed between the hot wire/load and ground on the same circuit. This adds the needed current load to trick the computer into thinking it has incandescent bulbs installed. The test subject in this video is my 1982 Yamaha Virago XV920.

свернуть