50% more power? Lets find out and you be the judge.

Milton HI FLOW V-Style 14pcs Purple Aluminum: [ Ссылка ]
Milton HI FLOW V-Style 6pc Steel: [ Ссылка ]
Best Lock on Tire Chuck Made! [ Ссылка ]
USA MADE 50' 3/8 Air Hose: [ Ссылка ]
Ingersoll Rand 3/4 impact gun: [ Ссылка ]
Chicago Pneumatic right angle grinder: [ Ссылка ]
These are all products I use and bought with my own money. The links are affiliate links.



TESTs
IMPACT GUNS SPEEDS
4200rpm with I/M style and Automotive Style fittings
5700rpm with V-Style fittings
DIE GRINDER SPEEDS
3000-5000rpm increase with V-style(tested by ear as the speeds exceed my meters capacity)
SIZE FLOW
.031sq inches to flow air with I/M and Automive fittings
.040sq inches to flow air with hand DRILLED out I/M fittings

.071sq inches to flow air with V-Style fittings





 Thoughts:
I feel like the tools are around all around 50% more powerful. Milton claim 70% more air flow and the math/dimensions seam to add up. I did tear down the couplers and they have far larger holes than a standard coupler as well. I opted not to buy the Harbor Freight Merlin High Flow, because upon closer inspection they seem very crappy(technical term) and in this case they were more ($10 for 4pcs) than the top of the line Milton($20 for 14pcs).


I have drilled out M fittings in the past but didn't feel any improvement as you can only go a tiny bit. I have also done the same inside the M coupler but you can't do much in those without compromising the integrity. The standard M fittings has a hole with the surface area of .031sqaure inches; where the V style are .071 square inches. Drilling may get you up to .040 but the V style still flows twice the air.


www.instagram.com/sixtyfiveford/


This video is NOT a paid endorsement. I have never communicated with Milton nor did I receive these for free. I bought them directly from Amazon.

свернуть