In this episode I change a fuel tank on a Toyota Tundra. The customer was not able to add any gas to the tank. On most cars when this problem occurs, it's usually an issue with the canister vent shut valve being stuck closed. These valves are normally open to atmosphere which allow the tank to be filled. But these Tundras in particular are notorious for having roll over valve failures which are located right at the fill port to the tank.

Amazon Affiliate links to some of my favorite tools, I make a small commission but at not extra cost to you, it helps support the channel and the hard work that goes into making weekly videos, thanks! These are not the cheapest tools but dang are they good! And have very good warranties, some of them lifetime:
Milwaukee M12 3/8" Ratchet with Battery - [ Ссылка ]
Milwaukee M12 3/8" Ratchet Bare Tool - [ Ссылка ]
Milwaukee M12 Stubby 3/8 Impact Driver with battery - [ Ссылка ]
Milwaukee M12 Stubby 3/8 Impact Driver Bare Tool - [ Ссылка ]
Sunex Metric Impact Socket Set (My absolute favorite sockets, especially the swivels!) - [ Ссылка ]
Vessel Impacta Screw Driver Set (Best quality screw drivers for the money!) - [ Ссылка ]
Knipex Plier/Cutter Set - [ Ссылка ]
High Leverage Ratcheting Wrench Set - [ Ссылка ]

0:00 Intro
0:40 Look at New Tank
0:59 Disassembly
1:09 Fuel Feed Disconnect
1:35 Evap Canister Disconnect
2:32 Fill Tube Disconnect
4:30 Fuel Tank Removal
6:30 Fuel Tank Installation
7:17 Fuel Transfer
7:50 Starting Her Up

свернуть