In this video, Ask This Old House master electrician, Heath Eastman, installs undermount, LED deck railing lights for a homeowner whose only deck lighting includes a single, bright spotlight.

SUBSCRIBE to This Old House: [ Ссылка ].

Heath Eastman installs LED strip lights to the underside railing of a deck. Heath helps a homeowner transform their dark deck into a suitable hangout spot for after the sun goes down. By adding undermount lighting, it can provide light for the deck but also illuminate where you might be walking. They are also very easy to conceal. Heath goes through the process of installing waterproof strip lights and shows how you can make them last longer in the outdoors. By using mounting channels to put the lights in and heat shrink tubes to protect wire connections, he shows how to protect the lights from the elements. In just a few hours and for a few hundred bucks, Heath shows how you can transform your deck into a space you’ll always be happy to come home to.

Time: 2-3 hours
Cost: $100+
Skill Level: Moderate

Tools:
Power drill [[ Ссылка ]]
Heat gun [[ Ссылка ]]
Hammer [[ Ссылка ]]
Lineman’s pliers [[ Ссылка ]]

Shopping List:
LED waterproof strip lights [[ Ссылка ]]
Mounting track [[ Ссылка ]]
Alcohol wipes [[ Ссылка ]]
Landscape wiring [[ Ссылка ]]
Brass barrel connectors [[ Ссылка ]]
Shrink tube [[ Ссылка ]]

Steps:
1. Find the nearest power source. That will help you determine how much work will be required to run new cables to the deck lights. In Heath’s case, there was already an outlet off the deck that he used to connect the transformer to. If there is no receptacle nearby, you will need to install one. This will drive up the time and cost required to do the project.
2. Measure how far back you want the lights to go. You don’t want to see the strip so Heath chose to set his back 1½ inches.
3. Mount the track under the railing.
4. Use an alcohol wipe to help the strip adhere to the mounting track.
5. Slowly stick the strip along the mounting track(s).
6. Make connections between the LED strips.
7. Tuck the wires out of the way and staple it to the surface.
8. Two should be left unconnected for the feed wire, somewhere central of all the strip lights. You don’t want to connect them all together because you will have the potential of the lights dimming towards the end because of voltage drop.
9. Run a wire from a receptacle to the LED lights.
10. Use brass barrel connectors to connect the lights to the wire. Put a shrink tube around each connector and apply heat.
11. Hide and secure the wire.

Where to find it?
Heath installed sections of 3’ White LED Landscape Strip Light—12VAC—1P67 Waterproof, which is manufactured by SuperBrightLEDs [[ Ссылка ]]. Before buying, Heath suggests confirming that the lights are UL rated.

The other tools and materials required to install the lights, including the landscape wiring and pliers, can be found at home centers.

Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: [ Ссылка ]

Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: [ Ссылка ]

About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show, Ask This Old House answers the steady stream of home improvement questions asked by viewers across the United States. Covering topics from landscaping to electrical to HVAC and plumbing to painting and more. Ask This Old House features the experts from This Old House, including general contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram, and host Kevin O’Connor. Ask This Old House helps you protect and preserve your greatest investment—your home.

Follow This Old House and Ask This Old House:
Facebook: [ Ссылка ]
Twitter: [ Ссылка ]
Pinterest: [ Ссылка ]
Instagram: [ Ссылка ]

How to Install Deck Rail Lighting | Ask This Old House
[ Ссылка ]

свернуть