In this video Jeremy Honnold is going to walk you through how to set up the LX-101 color sensor so that it will send an output signal when it detects the blue colored fuel injector and ignore all other colors
The Panasonic LX-101 has 6 Mode Selections:
1. RUN mode
2. Tech mode
3. Sensitivity adjustment mode (tweaking)
4. Color or Mark mode
5. Time Delay set-up
6. Pro mode (which we will cover in another video)
The blue button is for the mode selection
On and Off button also used for selecting the options within the various modes.
I am going to press and release the mode selection button until the LED next to color is displayed
Auto = Mark mode typically used for registration mark detection
Color = Full RGB color sensing mode
I am going to select CLor
Press and release the mode button until TEACH mode is selected.
Next I am going to place the part that I want to sense within the field of view of the sensor and press and release the ON button
If the setting is accepted the sensor will display good and notice that the output light turns on. The sensor will go back into the RUN mode
The display shows a number value that is proportional to the shade of the color that was taught.
High number = similar color to what was taught
LOW number = dissimilar color to what was taught
We will cover all the other features of this series in upcoming videos so please be sure to like this video and subscribe to our channel.
To learn more about the LX-100 series visit: [ Ссылка ]
Buy this and thousands of other products on [ Ссылка ]
Register for your Online account today! [ Ссылка ]
Connect with us on social media:
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
LEGAL DISCLAIMER:
While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Ramco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability, and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Ramco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.
