In this episode of Vox Friendly Pedals, we are checking out the Hagerman VALVE tube boost pedal with a Vox AC15c1. The Hagerman Valve in built in Hawaii by Jim Hagerman. He's been making pedals since 1982, and has quite the lineup of very cool pedals and amps in his roster.
The Valve is Jim's take on the starved plate/starved heater from the Matsumi Valvecaster. Where the original pedal failed, Hagerman managed to make it work. Using a single 12AU7 preamp tube from Electro-Harmonix, the Valve gets rich tube driven harmonics that is very hard to get with this type of design.
The Hagerman Valve works great anywhere in your signal chain. You can place it before your overdrive to boost the input, or place it after to get a nice, harmonically filled volume boost. In this video, I will showcase both these methods, as well as you the pedal to boost a clean and dirty Vox AC15.
None Affiliate Link:
[ Ссылка ]
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
** The Hagerman VALVE was provided to the channel in exchange for a fair and unbiased review. Any opinions shared are my own.**
Patreon:
[ Ссылка ]
TTL Merch:
[ Ссылка ]
Thomann affiliate links:
- Vox AC15:
[ Ссылка ]
Amazon affiliate links:
- Vox AC15C1: [ Ссылка ]
Obsidianwire Affiliate Link:
[ Ссылка ]
Celestion Impulse Responses:
[ Ссылка ]
𝐓𝐈𝐌𝐄 𝐒𝐓𝐀𝐌𝐏𝐒:
0:00 In the mix
0:48 Boosting a clean AC15
2:19 Boosting cranked AC15
4:15 After an overdrive pedal
5:29 Before an overdrive pedal
✅ SUBSCRIBE:
[ Ссылка ]
►I upload new videos every SUNDAY!
⚡ 𝗖𝘂𝗿𝗮𝘁𝗲𝗱 𝘃𝗶𝗱𝗲𝗼𝘀:
🔴 VFP series: [ Ссылка ]
🔴 AC15 series: [ Ссылка ]
#thetonelounge
➡️
thetonelounge3247815624350876
![](https://s2.save4k.ru/pic/CASSKnq1rhg/maxresdefault.jpg)