Buy Now!
New Parking Brake Shoe Set from 1AAuto.com [ Ссылка ]
This video will show you how to install new parking brake shoes on your 2007-2013 Acura MDX. For drum brakes and parking brakes, shoes will eventually need to be replaced. If you are overhauling your rear brake system, or just need to replace worn out shoes.
This process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Phillips Head Screwdriver [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 22mm Socket [ Ссылка ]
• Locking Pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• 1/2 Inch Ratchet [ Ссылка ]
• 1/4 Inch Ratchet [ Ссылка ]
• 3/8 Inch Breaker Bar
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
