Buy Now!
New Wheel Bearing & Hub Kit from 1AAuto.com [ Ссылка ]

Worn bearings can create lots of annoying noise, and wear out tires unevenly. Watch this video to learn how to install a new bearing and hub in your 2008-13 Mazda 3.

• Check here for more videos on the 2008-13 Mazda 3: [ Ссылка ]

This process should be similar on the following vehicles:
2010 Mazda 3
2011 Mazda 3
2012 Mazda 3
2013 Mazda 3

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 32mm Socket [ Ссылка ]
• Bearing Race and Seal Driver [ Ссылка ]
• Press
• Snap Ring Pliers
• Straight Cutters
• Ratchet [ Ссылка ]
• Socket Driver
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Copper Anti-Seize
• Liquid Thread Locker
• Paper Towels [ Ссылка ]
• Rust Penetrant
• Center Punch [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer [ Ссылка ]
• Jack Stands [ Ссылка ]
• Pick [ Ссылка ]
• Wheel Chocks
• Wire Brush [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Mazda 3 2nd Generation 2008-13: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть