In this video I install a square 4 in 1, 12 volt, power control panel into my camping kitchen. This unit was combined with a misordered 3 port rectangular unit to change components around as they are all interchangeable.


The wiring is the biggest issue. To accomplish this I pulled the plastic part of an oversized crimp on female lead up a wire and stuffed more wires through the plastic part and soldered the 3 or so wires to the metal connector then pulled the female plastic part back over. This worked for up to 3 wires for the multigang connections. The finish look is displayed to show how the jumping from one to the other is wired.

The cutting should be done with a template cut it out of cardboard and make sure it fits well before cutting the wood or plastic mounting location.


You can view my finished Kitchen box it was installed into here:
[ Ссылка ]
And wiring in a PWM to control my Led lighting that extends from the switch here:
[ Ссылка ]

If this helped you like and subscribe, Thanks good luck on your project.

The product used was:
Linkstyle 4 in 1 Charger Socket Panel, 12V 4.2A Dual USB Charger Socket Power Outlet & LED Voltmeter & Cigarette Lighter Socket & LED Lighted ON Off Rocker Toggle Switch for Car Marine Boat RV Truck

And some parts from: (while not necessary I had it so I switched things around I preferred its USB 3.0 plug and wanted one more 12 volt cigarette lighter plug on the square unit. I even used its switch for an individual light switch for my led light so it was great for cannibalizing).
Linkstyle 4 in 1 Charger Socket Panel, QC 3.0 12V Dual USB Car Socket & LED Digital Voltmeter & Cigarette Lighter Socket Splitter & LED Lighted ON Off Rocker Toggle Switch for Truck Car Marine Boat RV

свернуть