In this video we are machining and welding to repair a cracked Caterpillar 789 Dump Truck suspension part. This part is the top cap of the suspension Front Strut on the dump truck. There is a crack right through the weld joint holding the pin into the top cap and the pin has been damaged. To repair we need to machine out the damaged weld and pin before drilling, boring and weld prep machining the top cap to suit the new pin. We machine up a new pin using 150mm (6” inch) 4140 solid bar and then interference fit into the top cap before MIG welding with Hobart Fabco XL525 dual shield wire. The suspension part is then back in the lathe to finish machining the weld and pin down to size. We then drill and tap a 1" (inch) hole in the pin to complete.

Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: [ Ссылка ]

Join our Patreon community: [ Ссылка ]

To see more follow us on online here:
Instagram [ Ссылка ]
Facebook [ Ссылка ]

Official CEE Merch shop: [ Ссылка ]

Check out our AMAZON store and explore our favourite finds that we use in the workshop:
[ Ссылка ]

About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!

Music: [ Ссылка ] #australianmachinist #machineshop #machinist

свернуть