Easy DIY guide on how to replace a Tides Marine dripless seal without removing the shaft. This guide assumes you have basic mechanical skills and tools, and are comfortable working around your boat.
First, let's gather the materials and tools you'll need:
• New Tides Marine dripless seal
• Screwdriver
• adjustable ratcheting Screwdriver [ Ссылка ]
• 2 Flathead Screwdrivers (In Case one doesn't bite)
• Crescent Wiss Tin Snips 9 3/4" [ Ссылка ]
• Crescent Wiss 13" Tin Snips. [ Ссылка ]
• Scott Blue Shop Towels [ Ссылка ]
If you are not comfortable working with seals or mechanical systems, do not attempt this procedure yourself. Seek professional help. 👍
Now, let's get started with the step-by-step process:
Step1: Remove the two screws holding the protective collar in place on the replacement seal.
Step 2: Remove the set screws holding the collar in place on the seal housing. These screws will be located on the forward end of the seal housing.
Step 3: Once the nuts are removed, carefully separate the two halves of the seal housing.
Step 4: Remove the seal retaining split ring and move it in front of the new seal. You may need to use a screwdriver to carefully pry it off.
Step 5: Remove the old seal from the shaft. You may need to use a screwdriver to carefully pry it off.
Step 6: Clean the shaft and the housing thoroughly with solvent and a rag.
Step 7: Slide the new seal back to the seal housing. Reassemble the seal housing, making sure to align the two halves carefully.
Step 8: Tighten the screws on the seal housing evenly, alternating between sides to ensure a proper seal.
Congratulations! You have successfully replaced your Tides Marine dripless seal without removing the shaft.
Instagram @theelliyacht
Facebook MV Elli-Yacht
[ Ссылка ]
www.theelliyacht@gmail.com
Note, as Affiliates, if you use the links above to purchase these products the Elli-Yacht may receive compensation that goes towards our production of this channel. Thnx, Jon & Karlynn
