Heeeeeeeey YouTubers! :)
Thanks for Watching! Please LIKE & SUBSCRIBE & Hit the Notifications Bell
This is what I used:
Sabrent 2TB Rocket 4 PLUS NVMe 4.0 Gen4 PCIe M.2 Internal SSD (Model - SB-RKT4P-2TB)
Sabrent USB 3.2 Tool-Free Enclosure for M.2 PCIe NVMe and SATA SSDs (Model - EC-SNVE)
SSD INFORMATION:
The Sabrent 2TB Rocket 4 PLUS NVMe 4.0 Gen4 PCIe M.2 Internal SSD Extreme Performance Solid State Drive (SB-RKT4P-2TB) delivers all the advantages of flash disk technology with PCIe Gen4.0 x4 interface.
Based on TLC NAND Flash memory, its performance speeds can reach up to 7100 MB/s (read) and 6600 MB/s (write) when using a PCIe Gen4 motherboard. Using a PCIe Gen3 Motherboard Speeds will reach up to 3400 MB/s (read) and 3000 MB/s (write). Power consumption is much lower than traditional hard drives, making it the best embedded solution for new systems.
The Sabrent 2TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 Internal SSD was designed using PCIe 4.0 which allows for speeds of up to 7100 MB/s (read) and 6600 MB/s (write), significantly faster than PCIe 3.0.
Note: In order to take advantage of these speeds, a PCIe Gen4 motherboard is REQUIRED. Otherwise it will be at pcie gen 3 speed at max of 3500MB/s.
When installing any NVMe PCIe 4.0 SSD directly onto a PCIe Gen4 Motherboard a Heatsink is required to dissipate the heat generated by the drives extreme speed levels to avoid thermal throttling and maximize performance.
The Sabrent 2TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 Internal SSD is backward compatible with PCIe 3.0. Using a Gen 3 PCIe motherboard will enable the user to reach speeds of up to 3400 MB/s (read) and 3000 MB/s (write).
Features:
• NVMe M.2 PCIe Gen4 x4 Interface.
• PCIe 4.0 Compliant / NVMe 1.3 Compliant.
• Power Management Support for APST / ASPM / L1.2.
• Supports SMART and TRIM commands.
• Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
• Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision.
• Upgradeable Firmware.
Package contents:
• 2TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 SSD.
• User Manual.
ENCLOSURE INFORMATION:
The Sabrent USB 3.2 Tool-Free Enclosure for M.2 PCIe NVMe and SATA SSDs is the perfect solution for your enclosure needs!
FEATURES:
CONVENIENCE: 100% Tool-Free, quickly install and remove SSDs without any tools.
DESIGN: Ultra-slim Aluminum case with ABS frame. Sleek, Durable, and Convenient. Portable yet durable, ideal for traveling.
COMPATIBILITY: M.2 form factor compatible with both SATA and NVME in sizes: 2242/2260/2280.
SPEED: USB 3.2 supports data transmission speeds of up to 10Gbps for steady and efficient data transfer. Backward compatible with USB 3.1 and USB 3.0 at respective speed limits. .
PLUG & PLAY: Ultra-fast 10Gbps throughput, low latency, and power efficiency. Perfect for tech nerds, 4K content designers, and engineers. At up to 1000MB/s, Data copy and transferring will be done in in no time.
PACKAGE CONTENTS:
• USB Tool-free Enclosure.
• 8″ Type-C to Type-C cable.
• User Manual.
Ещё видео!