I recently upgraded my internet connection and discovered that my current firewall/router could not handle the 1 Gig internet speed with filtering, and IDS/IPS was enabled. After trying various tuning options and upgrading the hardware my firewall was running on, I still had no luck, so I finally decided it was time to switch. This video will walk you through what I did and the process I used to make this as painless as possible.
Below are links for some of the equipment I use in my network should you need more information. These are Amazon Affiliate Links, and as an affiliate, I earn a small percentage without affecting your cost.
Things used in my network:
QNAP 12 Port Managed 10GbE switch: [ Ссылка ]
Qnap 12 Port unmanaged 10GbE switch: [ Ссылка ]
Qnap TS-453B NAS: [ Ссылка ]
TP Link 16 Port Managed Switch: [ Ссылка ]
Qnap 10Gbe NIC card: [ Ссылка ]
Gigabyte GC-AQC107: [ Ссылка ]
TRENDnet TEG-10GECTX: [ Ссылка ]
QNAP QXG-10G1T: [ Ссылка ]
10Gtek 10Gbe NIC card (Intel Compatible): [ Ссылка ]
Sonnet Presto Solo 10GbE NIC: [ Ссылка ]
Asus 10Gbe NIC card: [ Ссылка ]
Ubiquiti Edge Router X: [ Ссылка ]
Netgear 8 Port Switch: [ Ссылка ]
Netgear 8 Port Switch: [ Ссылка ]
TP -Link 8 Port: [ Ссылка ]
QNAP QSW-308-1C (with combo port): [ Ссылка ]
QNAP QSW-308 (without combo port): [ Ссылка ]
Ipolex SFP+ Transceiver: [ Ссылка ]
CAT7 Patch Cable: [ Ссылка ]
Intel 10GbE Network Card: [ Ссылка ]
QNAP QSW-M408-2C: [ Ссылка ]
Ubiquiti Muti-Mode SFP+: [ Ссылка ]
Multi-Mode Fiber Cable: [ Ссылка ]
LinkUp CAT 8 Cable: [ Ссылка ]
Cat 6a/7 RJ45 Shielded: [ Ссылка ]
Cat 7 Cable: [ Ссылка ]
Intel 10GbE Network Card: [ Ссылка ]
QNAP QSW-M408-2C: [ Ссылка ]
Sabrent 5GbE USB Network Adapter (NT-SS5G): [ Ссылка ]
![](https://s2.save4k.ru/pic/DzF6ANFX2fo/maxresdefault.jpg)