IMPORTANT READ READ READ
ANYTIME YOU WORK ON AIRBAG PARTS IN YOUR VEIHCLE, YOU NEED TO DISCONNECT YOUR BATTERY FOR SAFETY .
Tools Needed :-
1- T-30 Torx bit
2- Philips Screw Driver
3- Small thin flat screw Driver or Mini Hook Pick
Steps for airbag removal :-
1- Remove the T-30 Two screws from the right and left side of Steering wheel to remove the airbag
2- Move Airbag to the left side carefully to get to the two Airbag Cables attached to the airbag, Orange and Yellow Cables
3- Use your flat screw driver or Mini Hook pick to get the cables harness out
Steps for airbag replacement :-
Reverse order
![](https://s2.save4k.ru/pic/EErikCq25_g/maxresdefault.jpg)