This is part 9 of a series on making a Bingham Projects Take-Down Recurve Bow. In this video, I do all the final sanding through 400 grit and then start spraying on the actual finish product. Every thing really pops once you start the spraying process.
The rest of the series can be found at the following links:
Part 1 - Overview - [ Ссылка ]
Part 2 - Building the Form - [ Ссылка ]
Part 3 - Building the Heat Box - [ Ссылка ]
Part 4 - Gluing up the Limbs - [ Ссылка ]
Part 5 - Limb Clean Up and Riser Prep - [ Ссылка ]
Part 6 - Hardware Install and Limb Tillering - [ Ссылка ]
Part 7 - Limb Tip Overlays - [ Ссылка ]
Part 8 - Shaping the Riser - [ Ссылка ]
Part 9 - Finishing the Bow - [ Ссылка ]
Part 10 - Final Thoughts - [ Ссылка ]
This video and description may contain affiliate links and as an Amazon Associate I earn from qualifying purchases which means that if you click on one of the products links, I'll receive a small commission.
Ещё видео!