How to install the Onefinity CNC Z-20 Elite Motor Brake.

Onefinity CNC is proud to announce we now offer a Z-20 Z slider brake. This brake is intended for use with the Z-20 Z sliders with an 80mm spindle. Due to the heavy weight of a 80mm spindle and the more severe pitch of the z-20 ball screw for fast movement, a user can possibility experience z-slider drop. This brake holds the z slider from moving when the power is turned off or estopped. Only when power is applied can the z slider move.
This is only for use with Onefinity Elite Machines.
The motor is the same 1.2nm closed loop stepper but has a built in brake. There is no need for any external drivers or additional wiring. This is a simple one minute swap that anyone can do!

Get yours today here: [ Ссылка ]

*Special note:
1) Older machines may not have a coupler that has a grub screw. Disregard this grub screw step if your coupler does not have a grub screw to tighten to the flat part of the motor shaft.
2) All blue dip switches (white number switches under the motor cover) should be set to on, as described here: [ Ссылка ]




[ Ссылка ]
[ Ссылка ]

свернуть