Baileigh Industrial is proud to introduce our new TN-400 abrasive pipe and tube notcher. This notching machine is perfect for coping the ends of 3/4" OD to 2" OD tubing or pipe at almost any imaginable angle from 0 to 60 Degrees. It uses a powerful 3 hp motor that requires 220V single phase to turn the 79″ x 4″ belt at speeds of 5420′ per minute. The TN-400 can notch through tube or pipe in seconds giving you the perfect fit every time. This tubing notcher has a quick release taper lock mechanism for loosening the vise for making angle or position adjustments in seconds with no tools.

The vise carriage rides on a smooth Thompson shaft assembly for precision and ease of movement during the notching cycle. The engagement lever is pivoted to make notching effortless for the operator. The vise is self centering for perfect belt positioning every time. The jaws on the vise are of a V-block design to keep the part on center with the notching spindle, to hold the part more securely. The TN-400 tube notcher has a carriage stop for repeatable notches every time. The vise has an offset adjustment when more metal is required for strength required on certain areas of hand railing or chassis for rock climbers or dirt track cars.

Baileigh Industrials abrasive tube notchers require different size mandrels for each different OD intended to notch. Mandrel changing is made easy on the TN-400. All that is required is take off the quick change side guard, then loosen the belt tension hand wheel so the belt can be slid off, so the operator can change out the mandrel with a new size in seconds. Like all of Baileigh Industrial tube notchers, the TN-400 is built to the highest standards using only industrial grade materials. Please call a Baileigh Industrial representative for further information. This model is typically in stock for quick turnarounds.

свернуть