Buy Now!
New CV Axle Assembly from 1AAuto.com [ Ссылка ]

This video shows you how to install a new front right cv axle assembly from TRQ on your 1994-1997 Honda Accord (2.2L L4). A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

Estimated installation time for a professional technician is approximately: 2 hours 0 minutes

This repair was done on a 1995 Honda Accord LX 2.2L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
1994 Honda Accord
1995 Honda Accord
1996 Honda Accord
1997 Honda Accord

Tools you will need:
• Pry Bar [ Ссылка ]
• 17mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 36mm Socket [ Ссылка ]
• Brake Caliper Hanger [ Ссылка ]
• Side Cutters
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Copper Anti-Seize
• Gloves [ Ссылка ]
• Liquid Thread Locker
• Paper Towels [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Punch
• Rubber Mallet
• Wheel Chocks

Subscribe: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть