LCD KT LCD3 for TSDZ2: showing and configuring of motor max power.

The throttle at my left hand was always at max position. My lab power supply was setup for 45V and it can't give more than 5 amps, so max power could not be more than 225W, that is why I didn't tested with a higher value.

The KT LCD3 is running our own developed Flexible OpenSource firmware.
TongSheng TSDZ2 950W ebike mid drive motor controller is running our improved original firmware.
The motor pulls 18 amps and with my 48V charged, it pulls 950W at startup!! With a 52V battery, would pull over 1000W.

KT LCD3 showing the following data from TSDZ2 motor:
- battery voltage
- motor power in watts
- rider pedal power in watts
- motor current
- trip total Watts/hour
- pedal torque value
- pedal cadence
- bicycle wheel speed
- motor assist level
- brakes state
- battery state of charge

Read more here: [ Ссылка ]

свернуть