I converted an old Super Cycles bike into a DIY E-Bike with a few parts. My goal was to be able to do this conversion dirt cheap and without buying a Hub motor kit.

The drive train used a 500w motor, left handed free wheel sprocket and a double sided wheel hub. The idea was to keep the E-Drive Train separate from the pedals incase there is a break down, then I can still pedal home!

Scrap steel was welded to the frame and that was done to hold batteries:

-Link to DIY LiPo Video: [ Ссылка ]

The wiring was all done with 12 gauge braided wire for wires that move and solid core for anything stationary. A cheap engine starter switch was used since it can handle the amps running through it.

---------TEST FOOTAGE PART 2: [ Ссылка ]

свернуть