Check out Part 2! [ Ссылка ]

* *Products used* *
Spring tubing benders [ Ссылка ]
Larger Spring for radiator hoses [ Ссылка ]
Similar Heat Gun [ Ссылка ]

0:00 In this video, I will show you how to bend rubber hoses using a tubing bender and a heat gun to shape them to match the OEM hoses on a Nissan 240sx. This is a great way to save money on replacement hoses, and it's also a fun and rewarding project to do yourself.

6:45 The fun begins. The first step is to gather your tools. You will need a spring tubing bender, a heat gun, a pair of safety glasses, and a pair of gloves. You may also want to have a bucket of water on hand to cool the hoses down after you bend them.

Next, you need to choose the right size tubing bender for the hoses you are working with. The tubing bender should be about that is the same size as the inside diameter of the hose.

Once you have the tubing bender, you need to heat up the hose with the heat gun. Be careful not to overheat the hose, or it could melt.

After the hose is heated up, you can start bending it using the tubing bender.

Once the hose is bent to the desired shape, you need to cool it down in the bucket of water. This will help to prevent the hose from shrinking after it cools down.

Once the hose is cool, you can install it on your car.

And that's it! You have now successfully bent rubber hoses using a tubing bender and a heat gun. I hope you found this video helpful. If you have any questions, please leave a comment below. Thanks for watching!


* Just a heads-up, some of the links in the description are affiliate links. If you decide to purchase through these links, I'll earn a small commission at no extra cost to you. It's a simple way to support the channel and helps me continue creating content. Your trust means everything, and I appreciate your ongoing support! Thank You!

свернуть