When you get a machine from Honpo, you have no idea how to add a frame on Topwisdom. The following are the instruction videos and descriptions which can contribute to your operations.
Before adding a frame, you can prepare a marking pen and a ruler.
Step 1: Zero out all H rows of Data.
Step 2: Measure the length and width of the inner frame.
Step 3: The length of X and Y is reduced by each 40mm, then enter data.
Step 4: Choose the H frame you set, and set it in the first needle.
Make half of the length and width, the crossing point is the center of the X and Y axis.
Step 5: Align the laser with the crossing point.
Press the X center position, press “SET” below, and the data will be automatically filled.
Step 6: Measure the R angle and input the data (reduced 20mm).
Step 7: Return to the main page and check if the frame is set correctly.
#embroidery #embroideryideas #honpo #instructions
