Nextion HMI displays are great. But the documentation and the support is not very good, and the library currently does not work with the ESP32. Today I will show you the five most important features of the enhanced version and how to use them.
In the end, you will have a small keypad which can be used as a control center for your home automation. And of course, the library works now with the ESP32, not only with the Arduino.

I did already some videos about Nextion displays. They are the basis for this video and worthwhile to watch because I will not cover these details again. You will find links in the description.

Today we will:
1. Build a small device using a Nextion display with 6 Softkeys
2. When one of these keys is pressed, the beeper on the extension board will beep. You will learn how to achieve this by programming the display itself
3. Each key triggers an MQTT message. This message can be used to switch devices in your home-automation system
4. The device can receive MQTT commands and switch a relay accordingly
5. The enhanced version has a Realtime clock aboard. We will synchronize this clock once using internet NTP time. From then on, the display updates the time itself

Links:
My Nextion videos: [ Ссылка ]
Code: [ Ссылка ]
Another library: [ Ссылка ]

Enahced Nextion displays:
Different sizes: [ Ссылка ]
3.5" Enhanced Nextion Banggood: [ Ссылка ]
7.0" Enhanced Nextion: [ Ссылка ]
ESP32 Board: [ Ссылка ]

Supporting Material and Blog Page: [ Ссылка ]
Github: [ Ссылка ]
If you want to support the channel and buy from Banggood use this link to start your shopping: [ Ссылка ] (no additional charges for you)
Official Wemos Store: [ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
Please do not try to Email me or invite me on LinkedIn. These communication channels are reserved for my main job
If you want to buy me a coffee: [ Ссылка ]

свернуть