In this video the father and son duo, jeweller and diamond setters Kees and Niels van Dooren create Heart shaped diamond studs. They create these from scratch using modern technologies and high level diamond setting. Microscopical tiny diamonds of 1.1 mm each are set into the 14 kt yellow gold.

It all starts with a gold base plate which is heated up to release the tension. The metal is then further milled to achieve the required thickness. Afterwards a cutting edge laser engraver and cutter comes in to mark out and laser the desired design. Creating two identical heart shaped outlines. The next step is soldering the golden pens on to the studs. After which the elaborate diamond setting process can start.

The diamonds each weigh approximate 0.005 ct and are hold with shared prongs. By creating seats with a carbide round bur you can see the distance from another. Afterwards the walls are removed with a round carbide graver which was high gloss polished. These are polished with ceradent polishing wheels. Furthermore tiny prongs are created by removing excess metal with a flat graver into the seat. Then, gently the diamonds are put in place into the ,relatively soft, yellow gold. With a tiny prong pusher the golden prongs are bent over the diamonds thereby holding tightly two diamonds at the same time.

Thanks for watching!

Visit: [ Ссылка ] and
[ Ссылка ]


FOLLOW US:
Instagram: [ Ссылка ]
Facebook: [ Ссылка ]

Contact us for unique jewellery designs or orders: info@vandoorendiamonds.com

MUSIC:
JPB - High [NCS Release] [ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
Music provided by NoCopyrightSounds
Music promoted by Audio Library [ Ссылка ]

свернуть